PSR Automation Inc.
COMPLIMENTARY
PACKEXPO CODE
CALL US
FOR A FREE
CODE!
952-233-1441


TD120 Turn Disk
FILLING
SYSTEMS
CAPPING
SYSTEMS
Las Vegas, NV
September 25-27, 2017

OTHER
MACHINES
VISIT US AT
BOOTH #8354
ADDITIONAL
PRODUCTS
OTHER

-  Turn Disks allow for products to make 90 degree turns.
-  Ideal for use in product return systems, or when conveyor turns must be made in tight locations. 
-  Contact parts of the TD120 are made from 304 Stainless Steel and Plastic. The drive components are made from Aluminum and Steel. 
-  Adjustable Top Guides allow the user to adjust the top width.
-  Accommodates round bottles up to 5.5" diameter.
-  Works well for round, square, and rectangular bottles.
-  Includes Variable Speed Electrical Controls for 120VAC @ 15A. 

 
 
Hours of Operation
Monday - Friday
8:00 - 4:00
Contact
PSR Automation Inc.
805 130th Street West
Shakopee, MN 55379

Telephone:
952-233-1441

Fax:
952-233-3731

E-mail:
info@psrautomation.com

Click on the image below to stop auto-scroll.  Drag to move to next slide.
TD120 Turn Disk Additional Product Information
Turn Disks allow for products to make 90 degree turns using straight conveyors instead of curved. 

Curved Conveyors may not be ideal in some applications. Curved Conveyors usually require a large radius to make the turn, and in general require more power to drive, especially if heavy items are being conveyed. 
Curved Conveyors are also more expensive to fabricate and harder to adjust for different bottle sizes when using solid rails. 
 
The TD120 solves most of these issues by allowing the user to use straight conveyors. 
Ideal for use in product return systems, or when conveyor turns must be made in tight locations. 
 
Contact parts of the TD120 are made from 304 Stainless Steel and Plastic. The drive components are made from Aluminum and Steel. 
 
Our updated model now features an adjustable Top Guide, that allow the user to adjust the top width to accommodate round bottles up to 5.5" diameter.
This product works well for round, square, and rectangular bottles. If your bottles are relatively long compared to its width, we may need to make a special Top Guide. 
 
Includes Variable Speed Electrical Controls for 120VAC @ 15A. 
 
User must perform mounting of the unit, which usually requires drilling 4 holes into the existing conveyor. Designed for 6" wide conveyors, but we can create adapters if you require.  If desired, PSR Automation Inc. can test your containers to verify correct operation.